155 S130 Operation & Maintenance Manual
DIAGNOSTIC SERVICE CODES
Viewing Service Codes
Figure 235
Press the INFORMATION button (Item 1) to cycle the
DATA DISPLAY (Item 2) [Figure 235] until the service
code screen is displayed. If more than one SERVICE
CODE is present, the codes will scroll on the DATA
DISPLAY.
NOTE: Corroded or loose grounds can cause
multiple service codes and / or abnormal
symptoms. All instrument panel lights
flashing, alarm sounding, headlights and
taillights flashing, could indicate a bad
ground. The same symptoms could apply if
the voltage is low, such as loose or corroded
battery cables. If you observe these
symptoms, check grounds and positive leads
first.
Deluxe Instrumentation Panel
The optional Deluxe Instrumentation Panel offers an
additional view of service codes.
Figure 236
The Display Panel will list the Code Number, (CODE)
hourmeter reading when the error occurred (HOUR), and
the User (USER) who was logged in to operate the
machine when the error occurred [Figure 236].
A total of 40 Codes can be stored. When more than 40
codes occur, the oldest code will disappear and the
newest code will be in the number 1 position.
To Next Page
Loading...