S250 Bobcat Loader
SPEC-4 Operation & Maintenance Manual
LOADER SPECIFICATIONS (S250) (CONT’D)
Machine Rating
Function Time
Weights
Controls
Lift breakout force 23024 N
Tilt breakout force 30426 N
Rated operating capacity (ISO 5998) 1200 kg
Tipping load (ISO 8313) 2400 kg
Axle torque 8077 Nm
Raise lift arms 4,4 s
Lower lift arms 3,2 s
Bucket rollback 1,9 s
Bucket dump 2,5 s
Operating weight, S250 3503 kg
Operating weight, S250H 3523 kg
Shipping weight 3141 kg
Engine Hand lever throttle
Starting Key-type starter switch and shutdown. Intake air heater automatically
activated by Standard or Deluxe instrument panel.
Front auxiliary (standard) Electrical switch on right-hand steering lever
Rear auxiliary (optional) Electrical switch on left-hand steering lever
Loader hydraulics tilt and lift Separate foot pedals or optional Advanced Control System (ACS)
Service brake Two independent hydrostatic systems controlled by two hand-operated
steering levers
Secondary brake One of the hydrostatic transmissions
Parking brake, standard Mechanical disc, hand operated rocker-switch on dash panel
Parking brake, two-speed option Spring applied pressure release multi-disk brake activated by rocker
switch
Vehicle steering Direction and speed controlled by two hand levers
Auxiliary pressure release Pressure is relieved through the coupler block. Push in and hold for 5 s.
To Next Page
Loading...