OPERATOR SAFETY WARNINGS
WARNING
Operator must have instructions
before running the machine.
Untrained operators can cause
injury or death.
W-2001-1285
Do not use loader in atmosphere
with explosive dust or gas or
where exhaust can contact
flammable material.
Never exceed rated operating
capacity.
Never leave loader with engine
running or with lift arms up.
To park, engage parking brake
and put attachment flat on the
ground.
Always carry bucket or
attachments as low as possible.
Do not travel or turn with lift
arms up.
Load, unload and turn on flat
level ground.
Never modify equipment.
Use only attachments approved
by Bobcat Company for this
model loader.
Safety Alert Symbol: This symbol with a warning statement,
means: “Warning, be alert! Your safety
is involved!” Carefully read the message
that follows.
Never use loader without operator
cab with ROPS and FOPS
approval. Fasten your seat belt.
OSW14-0903
WRONG
B-16251
B-16250
WRONG
B-16244
WRONG
WRONG
B-16248B-6578
WRONG
CORRECT
B-16245
CORRECT
B-16253
B-16249
CORRECT
B-16252
WRONG
Always use the seat bar and fasten
seat belt snugly.
Always keep feet on the pedals or
foot rest when operating loader.
CORRECT
B-10731a
Never carry riders.
Keep bystanders away from work
area.
Never use loader as man lift or
elevating device for personnel.
The Bobcat loader must be equipped with safety items necessary for each job. Ask your dealer about attachments and
accessories.
SAFETY EQUIPMENT
1. SEAT BELT: Check belt fasteners and check for damaged webbing or buckle.
2. SEAT BAR: When up, it must deactivate travel and hydraulic functions.
3. OPERATOR CAB (ROPS and FOPS): It must be on the loader with all fasteners tight.
4. HANDBOOK: Must be in the cab.
5. SAFETY SIGNS (DECALS): Replace if damaged.
6. SAFETY TREADS: Replace if damaged.
7. GRAB HANDLES: Replace if damaged.
8. LIFT ARM SUPPORT DEVICE: Replace if damaged.
9. PARKING BRAKE
10. BOBCAT INTERLOCK CONTROL SYSTEM (BICS™)
Never use the loader without
instructions. See machine signs
(decals), Operation & Maintenance
Manual and Operator’s Handbook.
U.S. Publication 6904178 (3-05) (1)
To Next Page
Loading...