35 S450 Operation & Maintenance Manual
MACHINE SIGNS (DECALS) (CONT’D)
Pictorial Only Safety Signs (Cont’d)
12. Lift Arm Crushing (7168033)
This safety sign is located on the front of the loader.
AVOID DEATH
Keep out of this area when lift arms are raised unless
supported by an approved lift arm support device.
Moving lift arm control or failure of a part can cause
lift arms to drop.
D-1020-0310
13. Single-Point Lift (7142142)
This safety sign is located on the side arm of the single-
point lift.
FAILURE OF THE LIFT ASSEMBLY CAN CAUSE
SERIOUS INJURY OR DEATH
BEFORE LIFTING LOADER:
1. Check the hardware and fasteners of the Single
Point Lift and Operator Cab (ROPS) for proper
torque.
2. Inspect Single Point Lift for damage or cracked
welds. Repair or replace components as
necessary.
• No riders on loader during lifting. Keep 5 m (15 ft)
away while lifting.
• See Operation & Maintenance Manual for more
information.
W-2841-0910
To Next Page
Loading...