08-08
Intermediate Update 34
LOADER SPECIFICATIONS (T190) (CONT’D)
Safety
* Level I - Acceptance is intended for protection from falling bricks, small concrete blocks, and hand tools encountered
in operations such as highway maintenance, landscaping, and other construction site services.
** Level II - Acceptance is intended for protection from falling trees or rocks for machines involved in site clearing,
overhead demolition, or forestry.
Bobcat Interlock Control System
(BICS), standard
Requires the operator to be seated in the loader with the seat bar in place and the
engine running. After the operator presses the “Press to Operate Loader” button, the
loader's hydraulic lift and tilt functions and traction drive can be operated.
Lift arm bypass control, standard Used to lower the lift arms in the event that the lift arms cannot be lowered during
normal operating conditions.
Seat belt, standard Should always be worn when operating the loader. Three-point shoulder belt provides
restraint for high range speeds.
Seat bar, standard Secondary operator restraint, also serves as an arm rest.
Operator cab, standard An enclosed operator cab with side screens with a minimal inside cab width of 838 mm.
Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and
SAE-J1043 and ISO 3449 Level I* for Falling Objects Protective Structure (FOPS).
Level II** option is available.
Lift arm support, standard Use for servicing when lift arms are raised.
Parking brake, standard Always set brake when leaving loader.
Grab handles, standard Should always be used when entering / exiting loader.
Safety tread, standard Slip resistant tread on lift arms and main frame to be used when entering / exiting
loader.
Attachment steps, standard Should always be used when entering / exiting loader.
Rear window, standard For emergency exit.
Front and rear working lights,
standard Use for indoor and low light operation.
Backup alarm, optional For use in areas with high traffic.
Lift kits, optional Lift kits are available so loader may be lifted into remote areas.
Special applications kit, optional Restricts objects and material from entering cab openings.
Operator's handbook, standard Weather-resistant operator handbook attached to the inside of the cab, providing
operational instructions and warnings decals with pictorials and international symbols.
To Next Page
Loading...