- 13 -
Range of time
：
5~99(min)
2.4 Press and the treadmill will run according to the pre-set value of the
program’s the speed and angle of program’s 12 segments will change circularly according to the
pre-set values. Every segment will last for 1 minute, when the time is reached, the speed and angle
value will change directly. (During exercise, you can press
“
or
＂
to directly
change the speed)
2.5 During the function setting of
P1~P5
, if press
，
the treadmill will start at once, the
unset are pre-set values, press
“
or
＂
and then you can change the pre-set speed
value of
PROGRAM
，
but in the next segment, the value will reset to the original value of the
PROGRAM
.
To Next Page
Loading...