BodyTech Fitness MAGNECTIC BIKE User Manual

BodyTech Fitness MAGNECTIC BIKE

15 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OWNER’S MANUAL

MAGNECTIC BIKE

IMPORTANT !

Please read all instructions carefully before using this product.

Retain this manual for future reference.

Table of Contents

Questions and Answers:

C
Christopher WhiteAug 2, 2025
What to do if there is no display on my BodyTech Fitness Exercise Bike computer console?
- L
  Lisa DeleonAug 2, 2025
  If there is no display on the computer console of your BodyTech Fitness Exercise Bike, first remove the console and check that the wires are properly connected to the wires from the handlebar post. Also, verify that the batteries are correctly positioned and the battery springs are making contact. If the display is still not working, the batteries may be dead, so try replacing them with new ones.
A
arielfordAug 11, 2025
Why is the heart rate reading erratic on my BodyTech Fitness Exercise Bike?
- A
  anthonyjoshuaAug 12, 2025
  If you're not getting a heart rate reading, or the reading is erratic on your BodyTech Fitness Exercise Bike, ensure that the wire connections for the hand pulse sensors are secure. When testing your heart rate, always hold the handlebar grip sensors with both hands for a more precise reading. Avoid gripping the hand pulse sensors too tightly; maintain moderate pressure.
E
ericksonstevenAug 21, 2025
What to do if my BodyTech Fitness MAGNECTIC BIKE Exercise Bike wobbles?
- S
  Sara BrewerAug 21, 2025
  To stop your BodyTech Fitness Exercise Bike from wobbling, turn the adjustable leveler on the rear stabilizer as needed to level the bike.

BodyTech Fitness MAGNECTIC BIKE Specifications

General

Brand	BodyTech Fitness
Model	MAGNECTIC BIKE
Category	Exercise Bike
Language	English

Summary

Safety Instructions

Important Safety Warnings

Consult physician before starting exercise, especially for those over 35 or with health problems.

Operating Caution

Assembly Instructions

Front and Rear Stabilizers Installation

Install the front and rear stabilizers using bolts, washers, and nuts.

Foot Pedals Installation

Install the left and right foot pedals onto the cranks, noting directional threading.

Seat Post, Seat Cushion, and Seat Sliding Tube Installation

Assemble the seat post, cover, cushion, and sliding tube onto the main frame.

Handlebar Post and Tension Control Knob Installation

Install the handlebar post, cover, and tension control knob with cables and wires.

Computer and Handlebar Installation

Computer Instruction Manual

Function and Operations

Maintenance

Cleaning

Troubleshooting