Bogen MVP130BG - Page 2

Bogen’s VOIP gateways (Models MVP130BG,
MVP2
10BG, MVP410BG, and MVP810BG) are 1,2,4,
and 8 analog por
t v
oice o
v
er IP
gate
ways that shall
allow paging communication to be sent over an exist-
ing IP network or the Internet.
All models shall include FXS/FXO for direct connec-
tion to Bogen’
s telephone paging interfaces.
All models shall utilize the H.323 or SIP protocols to
pr
o
vide complete inter
operability with other Internet
telephon
y solutions and shall suppor
t SPP
pr
otocol
for the use of dynamic IP addresses.
All models shall incorporate PSTN fail-over to auto-
maticall
y route calls over the PSTN network if the IP
network is disabled and shall provide call transfer, call
forwarding,call hold, call waiting, and name identification.
Configuration and management shall be possible using
a Web browser or Microsoft Windows
®
.
All models shall ha
v
e a tw
o-y
ear war
ranty
.
The MVP
130BG shall measure 4-3/8" W x 1" H x 5-
5/8" D and w
eigh less than
1 lb
.The MVP2
10BG shall
measure 6-1/4" W x 1-1/2" H x 9" D and weigh 2 lb.
The MVP410BG and MVP810BG shall measure 17-
1/2" W x 3-7/8" H x 8" D and weigh 8 lb.
(For Use with Multi-port Models):
The
V
OIP Gate
wa
y shall provide contact closure
Receive & Transmit in E&M mode.
Architect and
Engineer
Specifications*
50 Spring Str
eet,
Ramse
y
,
NJ 07446,
U
.S.A.
201-934-8500 FAX: 201-934-9832
Web Site: www.bogen.com
Technical
Specifications
Number of P
orts:
1,
2, 4 or 8
Port Interface: FXO, FXS & E&M support on
each port (MVP
130BG supports
FXS and FXO only)
FXS Interface: KTS, telephone set, or fax;
gr
ound and loop start
FXO Interface:
PBX station; CO line, loop start,
2-wire
E&M Interface: PBX E&M trunk; 2- or 4-wire
E&M Signal Types: I through V
Dialing: DTMF or pulse
Connectors: 1 RJ-48 (E&M); 1 RJ-1
1
(programmable FXS or FXO)
per port
LAN Port
Format: Ethernet/Ethernet II or SNAP
Interface:
10/100BaseT
Command Port
1- & 2-Port Interface: RS-232C/D; RJ-45
(RJ-45 to DB9 cable included)
4- & 8-Port Interface: RS-232C/D; DB25
(DB9 to DB25 cable included)
Speed & Format:
115.2K bps asynchronous
Protocols: H.323 V4, SIP, H.450.2, H.450.4,
H.450.6 & H.450.8, RTP, RTCP,
SMTP, Q.93
1,T.38 &
Group 3 fax relay, DTMF
out-of-band (RFC 2833)
Bandwidth Management: G.711, G.723, G.726, G.727,
G.729, & proprietary voice
compression, silence
suppression,VAD, CNG
V
oice Quality: DiffServ, G.
165,
G.
168,
adaptive
echo cancellation, forward error
correction, bad frame
interpolation,
tunable latency,
dynamic jitter buffers
Management: Web browser,Windows
®
,
SNMP agent
P
ower
Voltage & Frequency: 115V/240V AC, 47/60 Hz
Power Consumption:
1-Port - 4.5 W, 2-Port - 19 W;
4- & 8-Port - 46 W
Dimensions (W x H x D)
MVP130BG: 4-3/8" x 1" x 5-5/8"
MVP2
10BG: 6-1/4" x 1-1/2" x 9"
MVP4
10BG/MVP810BG: 17-1/2" x 3-7/8" x 8"
Product Weight
MVP130BG: less than 1 lb.
MVP2
10BG: 2 lb.
MVP4
10BG/MVP810BG: 8 lb.
Certification
EMC: FCC Part 15 Class A,
EN55022, EN55024,
EN6
1000-3-2, EN61000-3-3
Safety: CE, UL 60950, EN60950, cUL,
ACA TS-00
1
Telecom: FCC Part 68, CS-03,TBR21
*
Ar
chitect and Engineer Specifications ar
e a
vailable online in a
Micr
osoft®
W
or
d document to assist y
ou with pr
eparing y
our bids.