07
loosen
the screw
don't take off
this scew
3
4
5
How to assemble the stem folding clamp
1. Open the stem folding clamp as picture
and loosen the screw nut ①
2. Put aside of the loosen screw nut and
pad ②, pls note: don't take off this screw
bolt ③
3. Put handbar into the stem folding clamp,
and tighten the scew bolt ③ into ④ as pic
4. Tighten the scew nut ⑤ and adjust the
handbar and then lock the stem folding
clamp
To Next Page
Loading...