EasyManua.ls Logo

BOJ TB-1700 User Manual

BOJ TB-1700
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER MANUAL - MANUAL DE USO - MANUAL DE INSTRUÇÕES -
MANUEL D’UTILISATION - دليل المستخدم
TB-1700
TABLE BLENDER
Batidora de vaso - Liquidicadora -
Mixeur à bol -
ﻲﺟﺎﺟز طﻼﺧ
Question and Answer IconNeed help?

Do you have a question about the BOJ TB-1700 and is the answer not in the manual?

BOJ TB-1700 Specifications

General IconGeneral
BrandBOJ
ModelTB-1700
CategoryBlender
LanguageEnglish

Summary

Technical Data

Overview of Components

Control Manner Instructions

Unit Status and Speed Adjustment

Unit status is 'OFF' by default. Adjust speed from 'MIN' to 'MAX' for blending.

Pulse Button Operation

Press 'Pulse' for immediate high speed. Speed returns to '0' when released.

Smoothie Button Operation

Press 'Smoothie' for automatic processing to achieve smoothie effect. Machine stops automatically.

Ice Crush Button Operation

Press 'Ice Crush' for automatic ice crushing. Machine stops automatically after crushing.

How to Use the Appliance

Appliance Placement and Preparation

Place main body on stable surface. Clean jar, cut fruit to 15x15x15mm, add water (do not exceed capacity).

Jar Assembly and Setup

Assemble cover and center lid onto jar. Place assembled jar onto main body. Rotate switch to OFF and plug in.

Operation and Cleaning

Select speed, operate for 1-2 mins. Take off jar, pour contents. Disconnect plug, clean and dry jar.

Blender Jar Disassembly and Blade Installation

Blade Holder Removal and Installation

Place cup mouth down, turn clockwise to remove blade holder. Re-assemble seal ring and holder counter-clockwise.

Blade Caution

Beware the blade is sharp. Ensure seat ring is not missed during assembly.

Troubleshooting

Machine Does Not Work

Ensure correct assembly and jar coverage. Make sure the power plug is properly plugged in.

Machine Stops Suddenly

Processing bowl may loosen. Re-install the bowl cover for vigorous processing.

No Reaction to Controls

Reset to 'OFF', then 'ON'. Stop current working program if no reaction after knob/button operation.

Cannot Open Blender Lid

This is normal due to a protective structure. Remove the jar from the machine before opening the lid.

Safety Rules

General Safety Precautions

Read manual, keep away from children, use on stable dry surface, avoid heat sources, do not hang cord.

Electrical and Operational Safety

Do not immerse cord/unit in water. Do not use damaged parts. Use only default accessories. Prohibit no-load operation.

Cleaning and Maintenance Safety

Ensure unit is off for cleaning/disassembly. Wait for parts to stop. Be careful when cleaning to avoid cuts. Do not add hot water.

Recycling Information

Related product manuals