Model Designation :
Each model H camera has engraved on the front of the view-
finder the size of film for which the camera is intended : H 16
for 16 mm films and H8 for double run 8 mm films.
Equipment :
Each model H camera is supplied with at least one lens and
the following accessories :
1 rewinding handle 25
1 handcrank
1 flat-headed screw
2 stoppers for turret (screw into unused lens holes).
1 eye-piece, supplied only in default of eye-level focus
H 16 cameras :
2 empty take-up spools, one of 50 ft. and the other of
100 ft. capacity.
H 8 cameras :
3 empty take-up spools (for 25 ft., 50 ft. and 100 ft.). The
spools for 8 mm double run differ from those for 16 mm
in that they have different holes for the spool spindles
and are marked I and II in white figures on the flange.
Preliminary directions :
1. Read carefully all instructions relating to the use of the
apparatus.
2. Before loading with a spool, get acquainted with the various
controls and practise with the automatic loading device.
3. Never work the apparatus at a speed higher than 32 frames
per second unless the camera is loaded, as there is a risk
of injury to the mechanism.
4. Do not rewind the spring motor unless lever 12 is on
"Motor".
2
To Next Page
Loading...
