Need help?Do you have a question about the Bolide MVR9004/8 and is the answer not in the manual?
General overview and functionality of the MDVR device.
Highlights the main capabilities and specifications of the MDVR.
Detailed technical specifications of the MDVR, presented in a table.
Electrical characteristics and power requirements of the MDVR.
Describes the various use cases and scenarios for the MDVR.
Visual description of the MDVR unit and its components.
Technical drawings showing device dimensions and mounting hole locations.
Details on front and back panel connectors, LEDs, and modules.
Explains the functions of various ports on the back panel.
Information and diagram for connecting the MDVR's power cable.
Description and images of GPS and 3G/4G antennas.
Details on the device's alarm input/output interfaces and wiring.
Step-by-step instructions for installing the MDVR unit.
Overview and function mapping of the remote control buttons.
Guide on how to input text using the remote control and on-screen keyboard.
Configuration options for video recording modes and settings.
Instructions for connecting and configuring PTZ (Pan-Tilt-Zoom) cameras.
Steps for installing and using the PC software to play recorded video files.
Configuration for reporting vehicle data to a server via 3G/4G.
How to set the system's date, time, and time zone.
Configuration for vehicle-specific information like device number and ID.
Setting up user accounts, passwords, and permissions.
Configuration for network connectivity, including IP addresses and server settings.
Fundamental settings for video recording modes and parameters.
Configuration for the primary video stream quality and channels.
Settings for the secondary video stream, optimized for network transmission.
How to set up scheduled recording times for the device.
Configuration for secondary recording to prevent data loss.
Settings for using an SD card as a backup or primary storage.
Configuration for triggering recording based on alarm events.
Configuration for various sensor inputs and alarm triggers.
Setting up speed thresholds for triggering alarms and recording.
Configuration of the G-sensor for detecting motion and impacts.
Setting temperature thresholds to trigger alarms.
Configuration for motion detection to trigger recording or alarms.
Configuring actions based on alarm events, like output signals.
Settings for additional alarm types like timeout park or fatigue drive.
Managing device parameters, including backup, restore, and logo upgrade.
Instructions for formatting storage devices like HDD, SD card, and USB.
How to search and view system logs and event records.
Configuration for PTZ camera control and communication protocols.
Network configuration for 3G/4G connectivity and data reporting.
Configuration for wireless network (Wi-Fi) connectivity.
Settings for connecting and configuring an oil sensor.
Configuration for serial device communication (e.g., intercom, control panel).
How to search and play back recorded video files.
Displays device status, hardware/software versions, and connectivity information.
Overview of the CMSServer software interface for managing devices.
Troubleshooting guide for common issues encountered with the device.
Table showing estimated storage space usage per hour for different resolutions.
List of necessary tools and equipment for MDVR installation.
List of accessories required for MDVR installation.
To Next Page
General