Revision No.: 20 Revision Date 8/14/2014
Page 8 of 49
SPRINGS: Springs are used for the drive pawl assembly and ratchet
device. These springs should be checked twice a year and replaced, if
necessary.
HYDRAULIC SEALS: If the cylinder seals should require replacement
because of leaks, it is recommended that all other seals and o-rings be
replaced at the same time. Seal Kits are readily available. It is
recommended that seals be replaced annually. Heavy use may dictate
that the seals be replaced more often.
MACHINE PARTS: All components that are included on the tool should be
inspected once a year to determine if there are any cracks, chips, or
deformities. If so, immediate replacement is required.
To Next Page
Loading...