Bombard Commando C3 - Page 13

/ 8
2
ASSEMBLY PROCEDURE
We recommend that you follow the specific order of the assembly procedure. Proceed step by step
and refer to the corresponding pages.
PROCEDURE
PAGE
SECTION
1. inventory the elements composing your boat,
2
CHECK ON UNPACKING
and learn how to recognise them
I – IV
DESCRIPTION
2. activate valves in inflating position
5
INFLATION SYSTEM
3. slightly inflate the main buoyancy tube
6
INFLATION
4. assemble the floorboard
3 – 4
ASSEMBLY
5. finish inflation of the boat to the correct pressure
6 - 7
INFLATION / PRESSURE
CHECK ON UNPACKING
CAUTION
DO NOT USE A SHARP TOOL
The pack must contain: 1 buoyancy tube +
C 3
C 4
C 5
Floorboard
Number of pieces
Alu
3 + 3
Alu
3 + 3
Alu
3 + 3
Stringers
2
2
2
Wooden keel (3 elements)
X
X
X
Owner’s manual (2 volumes)
X
X
X
Repair kit
X
X
X
Standard equipment
Paddle
2
2
2
Pressure gauje
1
1
1
Foot-pump
1
1
1
Mast and pennant
1
1
1
Carrying bag
2
2
2
You can equip your boat with many optional accessories (transportation wheels, boarding ladder,
lifting rings etc.). Ask your dealer to advise you.
NOTICE :
IF YOU WISH TO ADD LIFTING RINGS, YOU MUST FIX THEM ON THE
BUOYANCY TUBE, NEVER ON THE FLOOR