EasyManua.ls Logo

Bomberg BOLT-68 - BOLT-68 - 3 Hands & GMT Instructions

Bomberg BOLT-68
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 15
BOMBERG MODEL - BOLT-68 - 3 Hands Automatic
Manual winding:
1. Unscrew and pull the crown out to the 1st click position.
2. Turn the crown anti-clockwise to wind the watch..
3. After winding, push the crown back to the normal position and screw it in.
Setting the date:
1. Unscrew and pull the crown out to the intermediate 2nd click position.
2. Turn the crown anti-clockwise to set the date.*
3. After the date has been set, push the crown back to the normal position
and screw it in.
Setting the time:
1. Unscrew and pull the crown out to the 3rd click position so that the
second hand stops.
2. Turn the crown to set the hour and minute hands.
3. After the time has been set, push the crown back to the normal position
and small second hand begins to run again. Screw it in back now.
*Important: It is not possible to adjust the date between 8.00 pm and 3.00 am.
It is necessary to adjust the date after each month with less than 31 days.
BOLT-68 - 3 Hands Automatic
Normal crown position
3rd click position
1st click position
Crown
Minute hand
Second hand
Date*
Hour hand
2nd click position

Other manuals for Bomberg BOLT-68

Related product manuals