Need help?Do you have a question about the Bomford B324 and is the answer not in the manual?
General| Brand | Bomford |
|---|---|
| Model | B324 |
| Category | Tractor Accessories |
| Language | English |
Provides detailed specifications for the B284, B324, BX324, BX364 models.
Details equivalent daily personal noise exposure levels.
Illustrates the main parts of the verge mower with labels.
General safety advice and the meaning of safety alert symbols.
Specifies requirements for the tractor to operate the implement.
Details hydraulic requirements for tractors using spool valves.
Instructions on preparing the machine for operation or transport.
Step-by-step guide for attaching the mower to the tractor.
Instructions for connecting the Power Take-Off (PTO) shaft.
Procedure for connecting hydraulic hoses to the tractor.
Details on routing and connecting remote control levers.
Explains the operation of control valve levers.
Instructions for removing transit stays before operation.
Procedure for bleeding air from the slew ram.
Guidance on connecting hydraulic hoses correctly.
Steps for the first operation of the machine.
Procedures for subsequent machine start-ups.
Instructions for checking and adjusting drive belt tension.
Guidance on inspecting guards for damage and wear.
General guidance for the operator of the machine.
Pre-operation checks required before starting.
Routine checks before starting the machine.
Tips and advice for efficient and safe operation.
Procedure to follow if the rotor stalls.
Information on vertical link gravity breakout.
Details on adjusting the roller height.
Instructions for transporting the machine.
Procedure to change PTO speed from 1000 to 540 rev/min.
Steps for adjusting the roller height.
Procedure for tensioning the drive belts.
Lubrication schedule and points for the gearbox.
Greasing points and frequency for the machine.
Diagram and explanation of hydraulic circuits.
Pre-storage checks and preparation for storing the machine.
Instructions for parking and removing the machine from the tractor.
Exploded view of the PTO shaft assembly.
Representation of the hose kit.
Representation of rams and hoses.
Exploded view of the roller assembly.
Exploded view of the cowl assembly.
Exploded view of the links assembly.
Exploded view of the gearbox assembly.
Exploded view of the bearing assembly.
Exploded view of the mainframe assembly.
Exploded view of the arm assembly.
Representation of the rotor shaft assembly.
Illustrations and identification of decals.
Exploded view of the drive bracket and pulleys.
Exploded view of the pack assembly.
To Next Page