15
4) Assemble the buffer plate well in position.
The buffer plate shall be assembled well in the residue outlet after finish cleaning each time.
ASSEMBLE YOUR SLOW JUICER
Firstly assemble the jar onto the motor unit by following the operation as below.
Make the symbol “ ” on the jar aligns with the symbol “ ” on the motor unit and push
the jar downwards (See Figure 1) and then rotate the jar clockwise to the lock position “ ”
so that the jar can be locked on the motor unit tightly.
Make sure the jar is assembled in position properly otherwise the appliance will not operate.
Besides, before operating, please make sure that the buffer plate must be assembled well in
the residue outlet (See Figure 2).
4) Then place the strainer into the rotary cleaning brush, and then make the symbol “ ”
on the strainer align with the symbol “ ” on the motor unit and then push the strainer
downwards. Make sure the strainer is assembled well into the jar.
5) And then put the grinding head into the jar. Make sure the grinding head is covered into
the axis of the motor unit.
Buffer plate
Residue outlet
Figure 1 Figure 2
To Next Page
Loading...