BOND MANUFACTURING Y96598A

Need help?

Do you have a question about the BOND MANUFACTURING Y96598A and is the answer not in the manual?

Summary

Assembly and Operation

Important Warnings and Notes

Key warnings about fountain placement, water quality, and avoiding damage to the finish. Notes on electrical safety and maintenance.

Pump Flow Rate Adjustment

Instructions on how to adjust the pump's flow rate to achieve desired effects and minimize splashing.

Troubleshooting Guide

Pump or Lights Not Working

Steps to diagnose and resolve issues with the pump not running or lights not illuminating, including power and airlock checks.

This document provides assembly instructions and troubleshooting information for a fountain, identified by Item#: Y96598A.

Function Description:

The device is a decorative fountain designed to circulate water and provide ambient lighting. It features a pump to move water and LED lights for illumination. The primary function is to enhance an environment with the visual and auditory elements of flowing water.

Important Technical Specifications:

While specific electrical specifications (voltage, wattage) for the pump and adaptor are not explicitly detailed, the manual emphasizes the use of a Ground Fault Circuit Interrupter (GFCI) in the branch circuit supplying the fountain pump and other pond equipment, indicating it operates on an electrical supply. The pump has an adjustable flow rate, allowing users to control the intensity of water flow. The fountain is designed to be splash-free as much as possible, though some splashing is noted as inevitable.

Usage Features:

Assembly: The fountain requires assembly, which involves connecting a flexible hose from the fountain's back door to the pump outlet (Step 1), connecting the LED light's cable line from the back door to an adaptor (Step 2), and then closing the back cover (Step 3). These steps are illustrated in Figure 1.
Placement: Users are advised to choose an appropriate, level location for the fountain, away from areas where it might get clogged with leaves, and ensuring the power cable can reach a socket. The location should also be one where any inevitable water splashing will not cause damage.
Water Filling: Before operation, the reservoir must be filled with clean water, ensuring the pump is completely submerged to prevent damage and ensure proper function.
Operation: Once assembled and filled with water, plugging in the pump and adaptor and switching them on will initiate water flow and light illumination within minutes.
Flow Rate Adjustment: The pump features an adjustable flow rate, which can be controlled by a slider on the pump body or by turning a regulator clockwise/counterclockwise. This allows users to achieve the desired effect and minimize splashing. Moving the slider towards '+/Max.' increases the flow rate, while moving it towards '-/Min' decreases it. Clockwise rotation typically results in full flow, and counterclockwise rotation reduces flow, as illustrated in Figure 2.
Safety Precautions: The manual includes a "WARNING" to read instructions carefully and keep the fountain power off until assembly is complete. It also warns against excessive weight or pressure on fountain sections to prevent falling and advises keeping pets, children, or anyone from sitting, leaning, or climbing on components. The use of water clarifier or algaecide is explicitly prohibited as it will damage the paint and void the warranty.

Maintenance Features:

Cleaning: To prevent buildup of white residue from mineral content in water, the fountain should be regularly cleaned with soap and water. Abrasive cleaners should not be used as they may damage the finish. The pump discharge and intake should also be checked for dirt and debris.
Water Management: It is crucial to always keep the fountain working with sufficient water and ensure the water is clean and free of debris and dirt for proper pump functioning. Water should be changed frequently.
Troubleshooting: A dedicated troubleshooting section is provided for issues such like the pump not running or lights not turning on. Before troubleshooting, users are instructed to turn off the power. Steps include checking the circuit breaker and other outlets, verifying water level, adjusting flow control, checking for pump discharge/intake blockages, inspecting for kinks/obstructions in the fountain, and addressing potential "air lock" in the pump by repeatedly plugging/unplugging it. Finally, checking and reconnecting the cord is suggested.
Customer Support: For questions or concerns, users can contact Bond Manufacturing toll-free at 1-866-771-BOND(2663), email Customer.service@bondmfg.com, or visit their website at www.bondmfg.com. This support is available Monday to Friday, 8 AM to 4:30 PM PST.
Manual Retention: Users are advised to keep the manual for future reference.