Warranty Card
Simple Troubleshooting
8
Customer's name：
Mr./Miss
Contact phone：
Customer's address：
Model(S/N)：
Stores address：
Date of purchase：
STATEMENT
The projector is product grade A,in living Environment,the
projector may cause wireless disturbance,maybe users should do
something effective to avoid the disturbance.
Multi-Screen
PJ8003
QUICK GUIDE
Warning
Tips
High brightness lamp!
Avoid staring or directly looking at
the light,especially for children.
1.Please wash the anti-dust mesh once a month in order
to protect your projector!
2.Before using this machine,please remove the protective
membrane from the top & bottom cover.
This <GUIDE>offer basic operation,please read the details in<Electronic-directions>from projector
software application;
Please read this<GUIDE>carefully before use;
The company reserves the right of final interpretation;
Appearance of the product and the UI please please prevail;
If product technology or software will upgrade, without prior notice.
Projector
Faults Troubleshooting
1. Check if choose the correct mode
2. The screen jammed because the distance is too big.
3. Is the mobile connect projector SSID wifi
If the signal source channel is selected correctly, please
refer to the signal input port of the projector
Check whether the power cord is plugged in place and
switch is on
Check the mobile and wifi connection
Screen interaction
not work
No signal
The Indicator light
is on but can not
open projector
Can not play online
Check whether the power cord is plugged in place
and the switch is on
Power failure
7 Maintenance and Simple Troubleshooting of
Projector
6 Wirecast5 Multi-screen for iPhone
1 System requirements
Step 1: Select “ Wirecast” and press “OK” to enter Wirecast interface.
IPhone: Click “Allow”or “OK” to start multi-screen sharing.
Android Mobile: When using the mobile phone for the first time, the following
interface will be called up to install "byteflymirror" according to the prompts.
Interact with the screen.
2 Airplay for iPhone
Step 1: Open setting menu of the phone, turn on WiFi, and connect to a certain
WiFi SSID.
Step 2: Connect the projector to the same WiFi SSID which is connected by the
phone. Enter “setting”, select “Network Setup”, Search for the same WiFi
SSID and connect it.
Step 3: Select “Airplay” and press “OK” to enter IOS wireless connection interface.
Step 4: Slide from the bottom of iPhone, click on Air-Play Mirroring, and select
the SSID to connect for multi-screen sharing.
Warm Tips: When connected to projector via Android phone, no matter with or
without USB Cable , there will be no sound from projector, sound will be only
from Android phone. Please refer to Point 5 - 5.EZMirror( Screen Mirroring
Interactive for Android mobile phone) in user manual if you want the sound
directly from the projector. Thank you!
Smart projector is a high-tech product integrating precision optics, electronics
and machinery. The improper maintenance of the projector during the daily use
will affect its service life and effects.
For the maintenance, important attention shall be paid to:
1. Dust prevention: Excessive dust will affect the heat dissipation of the projector
due to environmental impact. It is suggested to clean its dust filter for one and
half months according to the actual environment.
2.Ventilation: As the projector integrates the sound & photo-electricity, the optical
source will produce heat during its operation. Therefore, during the installation
and use, it shall be ensured that no objects around will block the air inlet and
outlet of the projector as the heat dissipation depends on cold air convection to
improve it working stability and service life.
3.Lens maintenance: Lens, as the core component of the projector, is directly
related to the picture definition and effect. The excessive dust thereon will
affect image quality. The dirty lens shall be wiped with soft cotton cloth for the
glass lens surface. Hard cloth or abrasives shall not be used.
4.Cleaning: Excessive dust on the projector surface shall be cleaned in a timely
manner, as it will affect the heat dissipation.
5.Moisture protection: The projector is vulnerable to the damp air. Its operating
humidity is about 45%-60%. The too damp air will affect its working stability.
6.Vibration prevention: The projector shall be strictly protected from strong
impact, extrusion and vibration. Try not to move and knock the projector
during its normal operation, which will cause the internal circuit faults.
7.The projector shall not be installed on the unstable, shaking and uneven desk.
8.The container with liquid shall not be placed on the projector.
9.The power shall be switched off or the power cord shall be unplugged when
not in use.
ios
ios 7 and above
All iPhone model after iPhone 4
All iPad model after iPad2
All iPod touch after iPod touch 4th generation
iPhone: 480*320~1136*640
iPad: 1024*768~2048*1536
At least 40MB free space needed
Device
Resolution Supported
Storage
Step 2: Connect the phone to the projector with a data cable.
Please visit www.bonsaiishop.com
to register for your warranty.
PJ8003
www.bonsaiishop.com
To Next Page
Loading...
General