BONTEC TC-003B - Introduction and Safety Precautions; Component Inventory

1
2
3
4
5
6
7
2
1
1
1
1
1
Assembly Instructions for TV Trolley Stand
Required Tools: Phillips screw driver.
Supplied Parts
Long Square Tube
Short Square Tube
Tube Connector With
Middle Pole With Three Holes
Pole Connector
No. Picture Description Quantity
8
4
Bottom Pole With Four Holes
Top Pole With One Hole
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation.
please call a qualified contractor. Check carefully to make sure there are no missing or defective parts. never use
defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose
that is not explicitly specified in this manual. We can not be liable for damage or injury caused by incorrect mounting,
incorrect assembly, or incorrect use.
Wheel
4
Shelf Support
1