EN
rS-S05 in operation
inSerting the Fall arreSt device
A Insert the fall arrest device into the rail profi-
le at the end of the rail or at the removal
point.
Ensure that the indicator arrow points up-
ward.
When you let go of the fall arrest device, the
device will automatically lock on the rail.
Function check by means of moving the fall
arrest device up and down on the rail manu-
ally. The device must lock in case of a jerky
downward movement or if you let go of the
device!
B Inserting attachment point A of the fall arrest
device into the ventral fastening eyelet at
waist height.
CAUTION – DANGER TO LIFE:
No extension by means of connecting rope or
additional karabiners!
C Inserting the fall arrest device into the central
front-side fastening eyelet at chest height (at-
tachment point B).
A
C
B
To Next Page
Loading...