21
Introduction
The Bornay Wind+ is in charge of controlling the wind turbine and the power
it produces in order to fuel consumptions efficiently.
There are various versions, depending on the application:
- Interface with DC output.
o For inverters with grid connection. DC version.
o For charging batteries by means of telecom rectifiers.
Telecom version.
- Pumping interface
o With DC output.
o With three-phase output.
This manual is only for the Interface.
This manual complements the wind turbine manual.
Both manuals should be read and understood perfectly before switching on
the installation.
For doubts or consultations, contact your distributor.
To Next Page
Loading...