Need help?Do you have a question about the Bosch 1617 and is the answer not in the manual?
General| No Load RPM | 8, 000 - 25, 000 RPM |
|---|---|
| Weight | 8.3 lbs |
| Voltage | 120V |
| Type | Fixed Base Router |
| Collet Capacity | 1/4 In., 1/2 In. |
| Base Diameter | 6 inches |
| Cord Length | 10 ft |
| Width | 6 in |
| Amperage | 12 Amps |
Keep workspace clean, well-lit, and free of explosives. Prevent accidents.
Guidelines for safe use of electrical tools, including plugs, cords, and grounding.
Stay alert, dress properly, avoid accidental starts, use safety equipment.
Proper techniques for using tools, securing workpieces, and tool maintenance.
Specific safety precautions when operating router tools.
Overview of router components and their functions, including figures and specifications.
Step-by-step instructions for safely installing and removing router bits.
Procedures for detaching the motor from different router base types.
Instructions for mounting the motor into router bases.
Information on the chip deflector's function and safe handling.
Detailed steps for adjusting router bit depth using fixed base mechanisms.
Explanation of the plunge feature for depth adjustment and bit entry.
Operation of the rocker switch for turning the tool on and off.
How to adjust and use the electronic speed control for optimal results.
Guidelines for proper router feed direction and speed for best cuts.
How to re-center the sub-base and align templet guides for precision.
Options for dust extraction hoods and their installation.
Proper technique for feeding workpieces on a router table for safe and effective cuts.
Recommendations for professional tool service and repair.
Information on brush wear and replacement.
Safety precautions and methods for cleaning the tool.
Safety guidelines for the work area to prevent accidents.
Electrical safety precautions for tool use, including plugs and cords.
Personal safety measures to avoid injury while operating tools.
Proper tool usage and maintenance for safety and longevity.
Functional description and specifications of routers, illustrated with figures.
Guidance on selecting quality router bits and proper shank length for use.
Step-by-step instructions for installing router bits safely.
Steps to remove the motor from different router bases.
Detailed steps for adjusting router bit depth using fixed base mechanisms.
Operation of the main ON/OFF rocker switch.
How to adjust and use the electronic speed control for optimal results.
Guidelines for proper router feed direction and speed.
Proper technique for feeding workpieces on a router table.
Recommendations for professional tool service and repair.
Information on brush wear and replacement.
Safety precautions and methods for cleaning the tool.
Step-by-step guide to assemble the router table structure.
Instructions for mounting the switch control box onto the tabletop.
How to install the aluminum miter channel into the tabletop.
Guide for assembling the router table fence components.
How to determine the correct mounting pattern for your router.
Steps to securely attach the router to the mounting plate.
Information on selecting and installing tabletop insert rings for different bit sizes.
General information and electrical requirements for the switch control box.
How to connect the router power cord to the switch box safely.
Explains how to operate the router using the switch box.
How to connect and use a wet/dry vacuum with the router table.
Instructions for assembling fence and tabletop featherboards.
Techniques for using featherboards to control the workpiece during routing.
How to adjust fence facings for proper bit clearance and support.
Steps for setting the router bit's depth and height for accurate cuts.
Using the router table for edge cutting and jointing operations.
Techniques for edge cutting using router bits with pilot bearings.
How to perform grooving, fluting, and veining operations.
Using the starter pin for routing curves and edge forming.
To Next Page
