Automatic Detectors LSN improved Installation | en 19
Bosch Sicherheitssysteme GmbH Operation Guide 2019.11 | 4.0 | F.01U.025.877
1. For surface-mounted cables, break out the prepunched cable entries.
2. For flush-mounted cables, insert the cable through the opening under the connection
board.
3. Secure the cable with a zip tie on the base plate.
FAA‑420‑RI‑DIN
Warning!
Malfunction and Damage
Note the maximum permitted current supply respectively the input voltage range of the
functional modes.
4 Wire the remote indicator as shown.
To Next Page
Loading...
