GreenTronic 7000T Duct Adapter Kit Installation InstructionsPart No. 7738007443
Bosch Thermotechnology Corp.
1-800-283-3787 | www.bosch-homecomfort.us
BTC 755003303 A | 06.2024
2
4. Connect ducting and secure properly.
5. Install proper termination for intake and exhaust.
NOTICE
Product damage!
Before energizing the water heater, make certain that the water heater is completely
full of water and that the cold water inlet valve is open. If the heating elements are not
completely immersed in water at all times, they will be damaged if energized for even
a short time.
6. Turn on unit and enter advanced settings by pressing the setting icon for 3
seconds. Go to F40 setting and change value to 1 to account for ducting. Refer
to manual for further details.
Figure 4
To Previous Page
Loading...
