English | 13
u Do not brake the saw blade to a stop by applying side
pressure after switching off. The saw blade can be dam-
aged, break or cause kickback.
u Ensure that the material is securely clamped. Do not
support the workpiece using your hands or feet. Do
not touch any objects or the floor with the saw while it
is running. There is a risk of kickback.
u Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
u In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u Do not open the battery. There is a risk of short-circuit-
ing.
u The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Wear hearing protection. Exposure to noise
can cause hearing loss.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for sawing wood, plastic, metal
and building materials on a firm surface. It is suitable for
straight and curved cuts. When using designated suitable bi-
metal saw blades, flush cutting is also possible. The saw
blade recommendations are to be observed.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Saw blade
(2)
Base plate
(3)
Saw blade receptacle
(4)
Locking sleeve for saw blade
(5)
Battery charge indicator
(6)
On/off switch
(7)
Lock-off button for on/off switch
(8)
Battery
A)
(9)
Handle (insulated gripping surface)
(10)
Battery release button
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw AdvancedRecip 18
Article number
3603CB24..
Stroke rate control ●
Rated voltage V= 18
No-load stroke rate n
0
min
−1
0–3100
Tool holder SDS
Stroke mm 23
Max. cutting depth
– in wood mm 100
– in steel (unalloyed) mm 20
– Pipe diameter mm 20
Weight according to
EPTA‑Procedure01:2014
A)
kg 2.3 (1.5Ah)to
2.6(6.0Ah)
Recommended ambient
temperature during char-
ging
°C 0to+35
Permitted ambient temper-
ature during operation
B)
and
during storage
°C –20to+50
Recommended re-
chargeable batteries
PBA 18V…W-.
Recommended battery
chargers
C)
AL 18…
A) Depends on battery in use
B) Limited performance at temperatures <0°C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/vibration information
Noise emission values determined according to
EN62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 86dB(A); sound power level
97dB(A). Uncertainty K=5dB.
Wear hearing protection!
Bosch Power Tools 1 609 92A 667 | (17.11.2020)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
