Bosch AdvancedShear 18V-10 - Intended Use; Product Features; Technical Data; Noise;Vibration Information

English | 13
Intended use
The garden product is intended for light trimming of shrubs
and lawn edges.
Product Features (see figureA)
(1)
Lock-off button for On/Off switch
(2)
LED for lock-off
(3)
Grass shear blade
(4)
Release button for blade attachment
(5)
On/Off switch
(6)
Shrub shear blade
(7)
Handle (insulated gripping surface)
(8)
Battery
(9)
Battery charger
a)
(country-specific)
(10)
Battery unlocking button
(11)
Battery port
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
AdvancedShear 18 V Grass shear Shrub shear
Article number
3 600 H57 0.. 3 600 H57 0..
Rated voltage V 18 18
Blade length mm − 200
Blade width mm 100 −
Tooth opening mm − 8
Weight according to
EPTA‑Procedure 01:2014
A)
kg 1.32 1.45
Serial number See serial number (type plate) on the machine
Recommended ambient temperature during
charging
°C +10... +35 +10... +35
Permitted ambient temperature during opera-
tion
B)
and storage
°C -20... +50 -20... +50
Battery type PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0
Ah, 4.0 Ah, 5.0 Ah, 6.0 Ah
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0
Ah, 4.0 Ah, 5.0 Ah, 6.0 Ah
No-load runtime upto 100 minutes upto 100 minutes
A) Depends on battery in use
B) Limited performance at temperatures <0°C
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Grass shear
Measured sound values determined according to
EN50636-2-94.
Typically the A-weighted sound pressure level of the product
is less than 70dB(A).
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN50636-2-94:
a
h
< 2.5 m/s
2
, K = 1.5 m/s
2
.
Hedge trimmer
Noise emission values determined according to EN
62841-4-2.
Typically the A-weighted noise levels of the product are:
Sound pressure level 59dB(A); sound power level
80dB(A). Uncertainty K=3dB.
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 62841-4-2:
a
h
< 2.5 m/s
2
, K = 1.5 m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
Bosch Power Tools F 016 L94 045 | (06.05.2021)