Bosch AMAX 2100 - Common Area Programming; Keypad Indication Programming

12 * 0884 – 0886 45 0887 – 0889 30 0890 – 0892 30
13 * 0893 – 0895 45 0896 – 0898 30 0899 – 0901 30
14 * 0902 – 0904 45 0905 – 0907 30 0908 – 0910 30
15 * 0911 – 0913 45 0914 – 0916 30 0917 – 0919 30
16 * 0920 – 0922 45 0923 – 0925 30 0926 – 0928 30
000-999 seconds 000-999 seconds, EN=045
seconds
000-999 seconds, EN=045
seconds
* AMAX 4000
** AMAX 3000 / 3000 BE / 4000
Common Area Programming
Option Address Default
Common area
(00 = none,
01 = follow area 2,
02 = follow area 2 - 3,
03 = follow area 2 – 4,
04 = follow area 2 – 5,
06 = follow area 2 – 7,
07 = follow area 2 – 8,
08 = follow area 2 – 9,
09 = follow area 2 – 10,
10 = follow area 2 – 11,
11 = follow area 2 – 12,
12 = follow area 2 – 13,
13 = follow area 2 – 14,
14 = follow area 2 – 15,
15 = follow area 2 – 16)
1593
0
Notice!
In case of common area, area 1 will be the common area. When there is only one area in the
system, the address for common area programming can only be programmed as 1.
Keypad Indication Programming
Option Address Default
Keypad alarm tone (0 = disabled, 1 = enabled) 0622 1
Audible entry delay warning when STAY armed (0 =
disabled, 1 = enabled)
1667 0
8.4.3
8.4.4
AMAX panel Address Programming | en 133
Bosch Sicherheitssysteme GmbH Installation Manual 2015.05 | 06 | F.01U.309.277