Users and Codes
The AMAX system provides two types of access codes, the installer codes and user codes.
Each of them allows specific access and operation of the AMAX panel functions.
User Code
The default user code is “2580”. This code should be changed to an individual code. If a new
user is assigned, an individual user code is assigned to this user.
Notice!
Identical codes are not allowed. User codes are not permitted to be the same as the installer
code.
User Code Permission Level
User codes can differ in permission levels. Each user code is assigned to a permission level.
Code Permission Level User Type
00 Master User 1
01 Master User 2
02 Super User
03 Basic User
04 Arming User
05 Duress User
06 -15 No Priority
Table 7.3: Code Permission Level
Please refer to Installer Code, page 45 for a description of the user permission levels.
User Code in Area
Any area can be assigned individually to a specific user.
Installer Code
The installer code is designed to program the AMAX panel. In addition, the installer code is
used for some code commands.
The default installer code is “1234”. This code should be changed to an individual code.
Notice!
Identical codes are not allowed. User codes are not permitted to be the same as the installer
code.
Quick keypad operations
The following table shows an overview of the quick keypad operations and the corresponding
user permissions of user codes and installer codes.
7.2
7.2.1
7.2.2
AMAX 2100 / 3000 / 4000 Settings | en 45
Bosch Sicherheitsysteme GmbH Installation Guide 2014.11 | 02 | F.01U.267.112
To Next Page
Loading...
