Bosch AMAX 4000 - Safety

8.2 PC Programming 93
8.2.1 Direct Connection 95
8.2.2 Modem Connection 98
8.2.3 IP Connection 101
9
Address Programming 105
9.1 Communication and Report Programming 105
9.1.1 Receiver Programming 105
9.1.2 Reports Programming 108
9.1.3 Communication Operations Programming 109
9.2 User and Code Programming 112
9.2.1 User Code Programming 112
9.2.2 Installer Code Programming 116
9.2.3 Code Length Programming 116
9.2.4 Code Permission Programming 116
9.2.5 Macro Programming 117
9.3 Zone Programming 118
9.3.1 Add/Delete Zone Programming 118
9.3.2 Zone Function Programming 123
9.3.3 Pulse Count Duration Programming 126
9.3.4 Zone Cross Timer Programming 126
9.4 Keypad and Area Programming 127
9.4.1 Keypad Area Programming 127
9.4.2 Area Timing Programming 127
9.4.3 Common Area Programming 128
9.4.4 Keypad Indication Programming 128
9.4.5 Keypad Lockout Programming 129
9.5 System Programming 129
9.5.1 System Setting Programming 129
9.5.2 System Factory Default Programming 132
9.6 Output and Siren Programming 132
9.6.1 Output Programming 132
9.6.2 Siren Programming 134
9.7 RF Device Programming 134
10
Troubleshooting 137
10.1 General Trouble 137
10.2 Trouble Fault Inquiry 140
11
Maintenance 153
11.1 Firmware Upgrade with the ICP-EZRU2 Upgrade Key 153
12
Technical Data 154
AMAX 2100 / 3000 / 4000 Table of Contents | en 5
Bosch Sicherheitsysteme GmbH Installation Guide 2014.11 | 02 | F.01U.267.112