Lit number indicators Description of the fault or tamper
First Second Third
1 Accessory module failure
1 1 Network/IP module 1 failure
1 1 1 - 2 Network/IP module 1 - 2 failure
1 2 Output expansion module failure
1 2 1 - 2 Output expansion module 1 – 2 fault
1 3 Input expansion module failure
1 3 1 - 6 Input expansion module 1 - 6 failure
1 4 Printer failure
1 4 1 Module DX4010 missing
1 4 2 Printer missing
1 4 3 Printer fault
1 5 RF receiver failure
1 5 1 RF receiver 1 fault
1 5 2 RF receiver 1 missing
1 5 3 RF receiver 1 jammed
1 6 RF sensor failure
1 6 1 RF sensor missing*
1 6 2 RF sensor fault*
1 7 RF repeater failure
1 7 1 – 8 RF repeater 1 – 8 missing
1 8 RF config failure
1 8 1 Configuration conflict sensors*
1 8 2 Configuration conflict repeaters*
1 8 3 Configuration conflict keyfobs*
2 Power failure
2 1 Panel AC failure
2 2 Panel low battery
2 3 Panel Aux power failure
2 3 1 - 2 Panel Aux power 1 – 2 fault
2 4 Bosch option bus power failure
2 4 1 - 2 Bosch option bus 1 – 2 power fault
2 5 RF repeater AC power failure
30 en | Faults and Tamper Conditions AMAX
2014.09 | 03 | F.01U.295.569 User Guide Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
