Bosch AMAX 4000 - Page 20

OUTPUT TIME3: sec
SIREN SETTINGS
SIREN TIME: min
Master Timer for Outputs
Certification
Menu Items
0-continuous
INT SIREN INDIC ON
0-disable 1-enable
0-disable 1-enable
0-disable 1-enable
00
00 = all/any Area/s 01–16 Area 1-16
1-pulse
SIREN BEEP ENABLE
SIREN OFF ANY KEY
2-continuous inv
0
OUTPUT AREA/ZONE 3
OUTPUT MODE 3
Master Timer for Outputs
1
Default
0
1
1
000
Parameters / Description
0
OUTPUT SETTINGS
see OUTPUT EVENT TYPE1
ENTER OUTPUT No.
6 OUTPUT MANAGER
OUTPUT EVENT TYPE3
06-ext.stay siren
05-ext.away siren
5
01-syst. disarmed
02-system armed
03-sys al audible
04-sys alarm all
07-int. siren
08-int. sir w.tmp
09-entry/exit del
10-tel.line fault
11-mains fault
16-fire alarm
17-fire reset
12-battery fault
13-tamper
14-ext. fault
15-all faults
18-away armed
19-stay armed
20-reset
21-follow zn even
22-RF kf button 3
33-medical alarm
34-RF power fault
23-RF kf button 4
24-chime indic.
25-verified alarm
26-unverif. alarm
27-technic. alarm
28-bypassed zone
35-follow zone
36-schedule
OUTPUT AREA/ZONE 1
00 = all/any Area/s 01–16 Area 1-16
OUTPUT EVENT TYPE1
00-not used
29-ready to arm
30-walk test
31-24 hour alarm
32-panic alarm
OUTPUT MODE 1
0-continuous
1-pulse
2-continuous inv
OUTPUT TIME 1: sec
Master Timer for Outputs
OUTPUT EVENT TYPE2
see OUTPUT EVENT TYPE1
0
0-continuous
0
1-pulse
2-continuous inv
OUTPUT TIME 2: sec
Master Timer for Outputs
0
OUTPUT AREA/ZONE 2
00 = all/any Area/s 01–16 Area 1-16
0
OUTPUT MODE 2
Figure 5.9: Output Manager
20
en | Programming and operating the AMAX panel AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH