Bosch AMAX panel 2000 - Technical Data; Specification

AMAX panel 2000 / AMAX panel 2000 EN Technical Data | en 75
Bosch Sicherheitssysteme GmbH Installation Manual F.01U.241.127 | V4 | 2011.12
9 Technical Data
9.1 Specification
Panel
Enclosure :
Dimensions (HxWxD): – 260mm x 280mm x 83,5mm
Weight: – 1950g
Environmental Considerations :
Relative Humidity: – 10%-95%
Operating Temperature: – -10°C - +55°C
Supervised Zones:
Onboard:
Z1 - Z8 COM – 8 Single or dual end-of-line (EOL 2,2KΩ) tamper point
support
P8 Tamper – Enclosure tamper input (does not reduce point capacity)
Programmable Outputs (PO):
Onboard:
OC 1 – supervised output max 500mA
OC 2 – supervised output max 500mA
OC 3 – max 100mA
Auxiliary module
(DX3010):
Relay 1-8 – Contacts rated 5A at 28VDC
Cable requirements: – Unshielded and shielded 0,6-0,8mm
Number of...
Users: – 16 (8 + 8Keyfob)
Key Fobs: – 8
Events: – 254 history events, stamped with time and date
– 254 EN history events, stamped with time and date
Pin Code variations – 10000
DX 3010: – 1
B 420 or DX 4020 or DX
4020 G
–1
Keypads: – 2
Power:
Power Supply Type: – A
Transformer: – 230V Input/18VAC 20VA Fuse=500mA
AC Input: – AC Input Voltage: 195 VAC to 253 VAC
– Line Voltage Frequency: 50 Hz
DC Output: – maximum current for all components 1100mA
– maximum current for all components 550mA (recharge Batt
80% in 72h)