Bosch AMAX panel 2100 - Quick Keypad Operations Instructions

The following table shows an overview and a description of the
keypad sound icons.
Sound Indicator Definition
Short beep A keypad button has been pressed.
Short beep, followed by a
one-second beep
The requested operation is refused.
Incorrect operation signal.
Two short beeps The system accepted the code. The
system executed the requested
function.
One short beep every
minute
Fault tone, unacknowledged system
failure.
One short beep every two
seconds
Exit time started.
Continued sound – Last 10 seconds on exit time
–
Keypad fault or tamper sound
(fault or tamper to be
acknowledged)
– Keypad alarm sound
Continuous 0.5 second
beep, stops for 0.5
seconds
– Entry delay time (until alarm
ends or system is disarmed)
–
Exit delay time (stops 10
seconds before exit delay
stops)
Quick Keypad Operations Instructions
The following table shows an overview of the quick keypad
operations and the corresponding user permissions. For
information on changing codes and defining user permission
levels, please refer to Codes, page 32.
2.4
10 en | Short information AMAX panel
2015.05 | 04 | F.01U.295.569 Bosch Sicherheitsysteme GmbH