Figure 8.13: A-Link Plus
Modify the parameter “Direct Link Port”: Select identified COM Port.
Figure 8.14: Direct link port
Open customer account AMAX panel 4000. Select index sheet “Link”. Select communication
model “Direct Connect”.
Click on Button “Connect” in order to connect to AMAX panel 4000.
94 en | Configuration
AMAX panel 4000 / AMAX panel 4000
EN
2013.07 | 03 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
