10
EURO • Printed in Germany • F016L69648 • AXT 1600 HP / AXT 2000 HP • GB • OSW 05/99
Working safely with this machine is possi-
ble only when the operating and safety in-
formation are read completely and the in-
structions contained therein are strictly
followed. In addition, the general safety in-
structions in the enclosed booklet must be
followed. Before using for the first time,
ask for a practical demonstration.
Wear safety glasses, protective gloves, sturdy
shoes and long pants.
Keep children away from the machine. Per-
sons under 16 years of age are not permitted
to operate this machine. Do not operate the
machine unattended.
Do not expose the machine to rain. Do not ex-
pose the machine to rain. Only store the ma-
chine in a dry place.
Take care when the spiral cutting knives are in
operation.
During pauses in the work, when not in use or
during work on the machine itself (e. g.,
changing of the working tools, repairs, clean-
ing, adjustment), pull the mains plug.
During operation, do not reach into the
feed opening 1 or the ejection chute 7. The
machine runs on for approx. 5 seconds af-
ter being switched off.
Before switching on, the machine must be as-
sembled according to the enclosed instruc-
tions.
If the cable is damaged or cut through while
working, do not touch the cable but immedi-
ately pull the mains plug. Never use the ma-
chine with a damaged cable.
The machine may be connected only to a
properly earthed power system. The socket
and extension cable must have a functional
protective conductor.
Connect machines that are used in the open
via a residual current circuit breaker with a trig-
gering current of 30 mA maximum. Use only
extension cables that are intended for outdoor
use and are protected against splash water.
Do not touch the plug or socket with wet
hands.
Do not driver over, crush or stretch the cable.
During operation, no other persons or animals
should be within a radius of 3 m. The operator is
responsible for third persons in the working area.
Bosch can assure flawless functioning of the
machine only when original accessories are
used.
1 Feed funnel
2 ON/OFF switch
3 Rotational direction switch
4 Appliance plug **
5 Ventilation slots
6 Hooks for collecting bag
7 Ejection slot
8 Undercarriage
9 Collecting bag/cover *
10 Pusher/clearing hook
* Accessories
** Country-specific connection
* Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
RAL UZ 54.
The A-weighted noise levels of the tool are typi-
cally: Sound pressure level: 84 dB (A). Sound
power level: <91 dB (A).
This shredder is designed for compostible cutting
of fibrous and woody garden waste.
For Your Safety
a
b
c
d
e
f
Tool Specifications
Silent shredder AXT 1600 HP AXT 2000 HP
Part number 0 600 851 2.. 0 600 851 4..
Rated power 1600 W 2000 W
Operating mode S 1 S 6 4/6 min
1)
No-load speed 260 RPM 260 RPM
Capacity max. 100 kg/h
2)
115 kg/h
2)
Branch diameter max. 30 mm
2)
max. 35 mm
2)
Collecting bag not included, Accessories
Weight approx. 21 kg approx. 22 kg
Safety class I /
œ
I /
œ
1) The S 6 operating mode (40 %) indicates a load profile of
4 min load and 6 min idle time. For practical application,
continuous operation is permitted.
2) Depending on the hardness of the wood.
Operating Controls
Noise/Vibration Information
Use as Intended
GB
AXT 1600/2000 HP - Buch Seite 10 Mittwoch, 14. Juni 2000 7:44 07
To Next Page
Loading...
