Configuring the user’s level:
1. Press [Level] to assign an authority level.
2. Press [ENTER] to continue.
3. Press [Yes] to change the default authority level for area 1.
4. Enter the authority level number (1 – 14) you wish to apply to
the user and press [ENTER]. The keypad shows Level
configured and returns to the previous menu.
5. If your security system has more than one area, use [NEXT]
and the previous two steps to set the levels for the additional
areas.
96 en | B94x/B93x Users menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.
To Next Page
Loading...
