Bosch B9512G - Keypads; Keypad Assignments; Keypad Name; Keypad Name (Second Language)

110 en | Keypads Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
5 Keypads
5.1 Keypad Assignments
The B9512G control panel supports SDI2 Keypads 1 to 32, or SDI Keypads 1 to 16. SDI
Keypads cannot be addressed above address16. The B8512G control panel supports Keypads
1 to 16.
5.1.1 Keypad Name
Default: Keypad#
Selections: Up to 32 characters
This parameter sets what is displayed at keypads. This is for informational purposes only.
Enter up to 32 characters of text, numbers and symbols to describe the keypad.
– Keypads display the first 20 characters. If more than 20 characters are used, the keypad
name text scrolls across the display one time. To scroll the text again, press [ESC].
– Spaces before, after and within a string of text are treated as text and are included in the
32 character limit.
RPS Menu Location
Keypads > Keypad Assignments > Keypad Name
5.1.2 Keypad Name (Second Language)
Default: blank
Selections: Up to 32 characters
This parameter sets what is displayed at keypads. This is for informational purposes only.
Enter up to 32 characters of text, numbers and symbols to describe the keypad.
– Keypads display the first 20 characters. If more than 20 characters are used, the keypad
name text scrolls across the display one time. To scroll the text again, press [ESC].
– Spaces before, after and within a string of text are treated as text and are included in the
32 character limit.
RPS Menu Location
Keypads > Keypad Assignments > Keypad Name (second language)
5.1.3 Keypad Type
Default:
– Address 1 = B92x Two-line Keypad
– All other addresses = No Keypad Installed
Selections:
– No keypad installed
– B91x Basic Keypad
– B92x Two-line Keypad
– B93x ATM Style Keypad
– B94x Touch Screen Keypad
– D1255 VFD Keypad (SDI)
– D125xRB Fire Keypad (SDI)
– D126x LCD Keypad (SDI)
This parameter identifies the type of keypad that is connected to the control panel at this
address. The information in this parameter is auto-configured when the keypad is first
installed.