Bosch B9512G - Page 189

Control Panel Points | en 189
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
Open/Close Point Type, Point Response Selections
Armed
State
Circuit
State 0 1 2 3 4 5 6 7 8 9 A B C D E F
Armed Short D
Disarmed Open T
Disarmed Short D
Key: D = transition from normal to short changes point arming state to disarmed (point arming state is armed
when point circuit state is normal), I = instant alarm, T = trouble, blank = no response
The point response is fixed to 1 for the Open/Close Point type.
Changing the point circuit state to normal arms the point. The control panel sends a point
closing report. Changing the circuit state from normal to open creates an instant point alarm.
Changing the point circuit state to short disarms the point. The control panel sends a point
closing report. Changing the circuit state from short to open creates a point trouble.
Custom Function Point Type, Single EOL Circuit Style, Point Response Selections
Armed
State
Circuit
State 0 1 2 3 4 5 6 7 8 9 A B C D E F
Armed Open CF CF T CF CF CF T CF
Armed Short CF CF CF T CF CF CF T
Disarmed Open CF CF T CF CF CF T CF
Disarmed Short CF CF CF T CF CF CF T
Key: CF = control panel executes custom function on transition to circuit state. T = trouble, blank = no response
When the point circuit state changes the control panel responds by activating a custom
function.
Custom Function Point Type, Dual EOL Circuit Style, Point Response Selections
Armed
State
Circuit
State 0 1 2 3 4 5 6 7 8 9 A B C D E F
Armed Open/
Short
T T T T T T T T T T
Armed Fault T CF CF CF CF CF CF CF CF CF CF CF T
Disarmed Open/
Short
T T T T T T T T T T
Disarmed Fault CF T CF CF CF CF T CF CF CF CF CF T
Key: CF = control panel executes custom function on transition to circuit state. T = trouble, blank = no response
When the point circuit state changes the control panel responds by activating a custom
function.
Notice!
For Dual EOL Circuit Style, purchase second 1kΩ EOL separately
Order ICP-1K22AWG-10, package of 10 resistors.