Bosch B9512G - Page 280

280 en | Configuring for Cellular Service Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
16 Configuring for Cellular Service
Sign-up for Bosch Cellular Service first
Before you can utilize cellular communication for reporting, personal notifications, RPS
connections, or RSC connections you need to register for Bosch Cellular Service at the Bosch
Installer Services Portal, https://installerservices.boschsecurity.com/.
Configure RPS for cellular service
Configuring RPS for cellular service is quick and easy using the Configuration Assistant. Click
Config to open the Configuration menu. Select OpenConfigurationAssistant.
Figure16.1: Configuration Assistant
If you choose not to use not to use the Configuration Assistant, follow the steps below to
configure RPS for cellular service.
1. Click Config to open the Configuration menu. Click System.
2. Click the Connectivity tab.
3. Click Cellular.
4. If you will connect from the internet to the panel using cellular IP over a PPTP VPN (a
login is provided with Bosch Cellular), click the VPN tab. This one-time setup automates
the PPTP VPN login and connection from the Connect window in RPS.
The VPN client (or Windows VPN) must be setup on your PC before RPS can use it. This
setup is not required if your network is configured for always-on IPSec VPN connection to
the network provider.
For instructions on setting up Windows VPN, refer to the Bosch Cellular Services User
Guide located at http://www.conettix.com/Downloads.aspx.
Configure the control panel account for cellular service
Configuring a control panel account for cellular service is quick and easy using the Account
Assistant.
In the Panel List, right-click the panel account you want to configure for cellular service, then
click OpenAccountAssistant.