Bosch B9512G - Page 48

48 en | Panel Wide Parameters Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
Notice!
UL 864 Requirement
To comply with UL 864 requirements for Commercial Fire Systems, set the Fire Reports
parameter to Yes for Route Groups 1 and 2.
Gas Reports
Reports in the Gas category:
– Gas Alarm
– Gas Restoral From Alarm
– Gas Missing.
– Gas Trouble
– Gas Supervision
– Gas Restoral From Trouble
– Gas Cancel
– Gas Supervision Missing
– Gas Supervision Restoral
To individually assign reports from the Gas category to a Route Group, click Gas Reports, page
51 in the menu tree.
Burglar Reports
Reports in the Burglar category:
– Alarm Report
– Burg Restore (After Trouble)
– Duress
– Missing Alarm
– User Code Tamper
– Trouble Report
– Missing Trouble
– Non-Fire Supervision
– Point Bus Fail
– Point Bus Restoral
– Non-Fire Cancel
– Alarm Restore
– Supervision Missing
– Unverified Event
To individually assign reports from the Burglar category to a Route Group, click Burglar
Reports, page 52 in the menu tree.
Personal Emergency Reports
Reports in the Personal Emergency category:
– Medical Alarm
– Medical Alarm Restoral (reserved for future use)
– Silent / Hold-Up Alarm
– Silent / Hold-Up Alarm Restoral
– Panic Alarm
– Panic Alarm Restoral (reserved for future use)
To individually assign reports from the Personal Emergency category to a Route Group, click
Personal Emergency Reports, page 52 in the menu tree.
User Reports
Reports in the User category:
– Forced Point: Reports forced point event.