Bosch B9512G - Page 143

Control Panels Keypad Installer menu | en 143
Bosch Security Systems, Inc. Installation Manual 2018.07 | 10 | F.01U.303.996
Type (Circle one) Scope (Circle one)
Keypad 21* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 22* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 23* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 24* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 25* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 26* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 27* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 28* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 29* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 30* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 31* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 32* No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
*Supported by the B9512G only.
Type
Scope
Area
1. Enter the installer passcode, and then open the [1] Installer Menu.
2. Go to [1] Programming Menu > [5] Keypad.
3. Use /Previous or /Next to go to the desired keypad.
4. Press Edit or Enter to edit the type.
5. Depending on keypad model:
Press the icon or softkey for the desired type.
-or-
Use Previous or Next to go to the desired type.
6. Press Save or Enter. The keypad shows Parameter saved and then asks if you would like
to edit the scope.
7. Press Edit or Enter to edit the type.
8. Depending on keypad model: