Bosch B9512G - Page 151

Control Panels Keypad Installer menu | en 151
Bosch Security Systems, Inc. Installation Manual 2018.07 | 10 | F.01U.303.996
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
_____ ____ (1) ___ _____ ____ (1) ___
!
Caution!
Any points programmed as fire supervisory points are latching.
Point Profile
Point Source
Point Area
Point Name
1. Enter the installer passcode, and then open the [1] Installer Menu.
2. Go to [1] Programming Menu > [7] Points.
3. Enter the point number and press Enter, or use /Previous or /Next to go to the
desired point.
4. Press Edit or Enter to edit the profile for the selected point.