English – 8
1 270 U020 XBP | (14.02.2019) Bosch eBike Systems
The USB port is reserved for connecting diagnostic
systems. The USB port does not have any other func-
tion.
u The USB port must always be completely sealed
with the protective cap (8).
Action Buttons Duration
Switch on on-board computer As required
Switch off on-board computer As required
Increase assistance
+
Decrease assistance
–
Display TRIP, TOTAL,
RANGE, assistance modes
–
Switch on bike lights
+
Switch off bike lights
+
Reset trip distance
– +
Activate push assistance
Implement push assistance
WALK
+
1.
2. As re-
quired
Switch from kilometers to
miles
–
1. Keep
pressed
2.
Display the versions
A)B)
– +
1. Keep
pressed
2.
Adjust display brightness
C)
– +
– or +
1. Keep
pressed
2.
A)
The eBike system must be switched off.
B)
The information is shown as scrolling text.
C)
The display must be switched off.
EN-61
To Next Page
Loading...
