| 13
Advanced Settings Guide
Bosch Connected Control BCC100 Thermostat (01.2022)
1.5.10 Unit Confi guration
This section allows the user to select the confi guration of their system. The user
can choose between Fossil Fuel, Heat Pump,Dual Fuel, Electric, and no Heating.
Once the user is in the System Settings, select Unit Confi guration to access this
selection.
1.5.10.1 Compressor Confi guration
This feature establishes the number of compressors stages that the equipment is
using.
Options: Fossil Fuel Stage(s) 1 and 2, Air Conditioner Stage(s) 0, 1 and 2
Default: Fossil Fuel Stage 1 Air Conditioner Stage 1
1. Main Menu
2. System Settings
3. Unit Confi guration
4. Heat Type
5. Stages
Depending on the Heat type chosen, the options available may vary.
Figure 37
1.5.10.2 Auxiliary Heating
This function allows for an automatic shift from compressor heat to auxiliary
heating (e.g. electric heat) when a Heat pump system is used.
This option is only for heat pumps.
Enables additional heating stage if compressor cannot satisfy the
current heating set point.
Options: Enable and Disable
Default: Disable
1. Main Menu
2. System Settings
3. Unit Confi guration
4. Heat Type (select Heat Pump)
5. Setup
Auxiliary Heating (under Heat Type)
Figure 38
To Next Page
Loading...
