Bosch BSG61666 - Page 24

24
Setting up en
Push the telescopic tube into the connecting piece of
the floor nozzle until it engages.
*
Depending on equipment level
*
To adjust the length of the telescopic tube, press the
adjusting button/adjusting sleeve in the direction of
the arrow and adjust the tube to the required length.
*
Depending on equipment level
*
Push the handle into the telescopic tube until it
engages.
*
Depending on equipment level
*
Holding the power cord by the plug, pull out the
required length and plug the plug into the mains
socket.