16
Vacuuming en
Professional upholstery nozzle
For gently and thoroughly cleaning
upholstered furniture, curtains, etc.
To clean the professional upholstery noz-
zle, simply vacuum using the handle.
If it is very dirty, the professional uphol-
stery nozzle can also be opened.
To do this, turn the two screws on the
sides of the nozzle (e.g. using a coin) and
remove the inner part from the nozzle.
After cleaning, replace the inner part
(make sure it is correctly seated) and
screw to the housing.
After use, the professional accessories can
again be conveniently stowed in the
accessories case.
You can use the parking aid on the back of
the vacuum cleaner if you wish to stop vac-
uuming for a short time.
Slide the plastic lug on the tool connector
into the groove at the back of the vacuum
cleaner.
To Next Page
Loading...
