21
Changing the dust bag and filters en
Cleaning the motor protection filter
The motor protection filter should be
cleaned regularly by knocking out the dirt
and rinsing.
Open the dust bag compartment lid.
Pull out the motor protection filter in the
direction of the arrow.
Clean the motor protection filter by
tapping it.
If it is very dirty, the motor protection
filter should be rinsed.
The filter must then be left to dry for at
least 24 hours.
After cleaning, insert the motor
protection filter into the appliance as far
as it will go and close the dust bag
compartment lid.
You can order new filters from our after-
sales service using the following
replacement part number: 618 907
To Next Page
Loading...
