EasyManua.ls Logo

Bosch BSG8PRO3 - Electrical Safety Notes

Bosch BSG8PRO3
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
de
de
en
When disconnecting the appliance from the mains, pull on
the plug itself to remove it; do not pull on the power cord.
Do not pull the power cord over sharp edges or allow it to
become trapped.
Pull out the mains plug before carrying out any work on the
vacuum cleaner.
Do not operate the vacuum cleaner if it is damaged. Unplug
the appliance from the mains if a fault is detected.
For safety reasons, only authorised after-sales service per-
sonnel are permitted to carry out repairs and fit replacement
parts to the vacuum cleaner.
Protect the vacuum cleaner from the weather, moisture and
sources of heat.
Do not pour flammable substances or substances containing
alcohol onto the filters (dust bag, motor protection filter,
exhaust filter, etc.).
The vacuum cleaner is not suitable for use on construction
sites.
=> Vacuuming up building rubble could damage the
appliance.
Switch off the appliance when it is not in use.
At the end of its life, the appliance should immediately be
rendered unusable, then disposed of in an appropriate
manner.
! Please note
The mains socket must be protected by at least a 16 amp cir-
cuit breaker.
If a circuit breaker is tripped when you switch on the vacu-
um cleaner, this may be because other electrical appliances
which have a high current draw are connected to the same
power circuit.
To prevent the circuit breaker from tripping, select the
lowest power setting before switching the appliance on, and
increase the power only once it is running.
9000 849 116 A 15.01.2013 11:58 Uhr Seite 6

Related product manuals