English – 9
u Be careful not to pinch your fingers between the
movable retaining bracket and the SmartphoneGrip
when inserting your smartphone.
Once you have inserted your smartphone, check that
the smartphone cannot come into contact with any
hard parts on the bike even in case of vibrations, as
this could cause lasting damage to the smartphone.
Keypad Lock Assembly
The keypad lock(13) supplied, together with the re-
moval blocker(12), prevents the SmartphoneGrip
from being quickly and easily removed by blocking
the release mechanism(4).
To insert the keypad lock(13), slide the keypad
lock(13) into the provided opening ➊ and carefully
screw it into place with a hex key (1.5mm)(14) ➋.
Note: The keypad lock is not an anti-theft device. The
keypad lock prevents the SmartphoneGrip from being
quickly removed from the holder. The keypad lock
does not affect the smartphone in any way.
Note: Never leave your smartphone unattended in
the SmartphoneGrip!
To remove the keypad lock(13), unscrew the secur-
ing screw with a hex key (1.5mm)(14) and remove
the keypad lock(13).
Bosch eBike Systems 0 275 U08 3SG | (28.02.2022)
To Next Page
Loading...
Need help?
General
